Choosing between a 13x4 and a 13x6 lace frontal is one of the most common decisions salon owners, boutique buyers and importers face when building a stock list. The two look…
Choosing between a 13x4 and a 13x6 lace frontal is one of the most common decisions salon owners, boutique buyers and importers face when building a stock list. The two look almost identical on a shelf, sit within the same price band in most wholesale catalogues, and are often ordered interchangeably. In practice, the extra two inches of lace depth change how the piece behaves on the head, how much styling freedom your client gets, and how much labour your stylist spends on blending. Getting the ratio right in your stock room reduces returns, cuts wasted lace, and helps you recommend the right piece with confidence at the consultation stage.
What the numbers actually mean
A frontal is described by two measurements: the width across the hairline and the depth from the hairline back towards the crown. Both figures are usually quoted in inches, and both matter for different reasons.
The 13 inch dimension
Thirteen inches is the standard ear-to-ear span for an adult head. It is the width that allows a frontal to cover the entire hairline, from temple to temple, without leaving gaps at the sides. Almost every frontal on the wholesale market is built to this width, which is why the first number rarely varies. When buyers compare frontals, they are almost always comparing depth.
The 4 inch and 6 inch depth
Depth is measured from the front edge of the lace straight back over the top of the head. A 13x4 frontal gives you four inches of parting space behind the hairline. A 13x6 gives you six. That is the whole difference on paper, but those two inches are the difference between a centre part and a deep side part, between a simple middle parting and a full updo with the hair swept back off the face.
It helps to picture where four inches lands. On most clients, four inches reaches roughly to the beginning of the crown. Six inches carries past that point, giving the stylist room to work diagonally, to build a side part that sits further back, and to create volume at the top without exposing the lace edge.
Why the extra depth changes the install
Parting flexibility
Four inches is enough for a centre part, a modest side part, and most everyday wear. It is not generous enough for a deep side part that sits well off-centre, or for styles where the hair is pulled back into a high ponytail or a slicked bun. Six inches opens those options up. If your client base includes a lot of updos, event styling or clients who change their parting regularly, the deeper frontal pays for itself in repeat appointments.
Coverage at the hairline and temple
Depth also affects how the piece sits at the temples. A deeper frontal gives more lace to work with when the client has a slightly wider forehead or a hairline that recedes at the corners. The stylist can trim back to the natural hairline rather than stretching a shallow piece to fit. Trimming is always easier than stretching, and a trimmed 13x6 will still cover a 13x4 footprint if the client later wants a shorter parting.
Lace consumption and cost per unit
More lace means more material and more hand-tying time, so a 13x6 typically sits at a slightly higher wholesale price than a 13x4 in the same grade and length. That difference is small relative to the retail value of the finished service, but it matters when you are building a stock list at volume. The practical question is not which is cheaper, but which one your stylists will actually reach for. Stocking a deep frontal that nobody installs is a false economy.
Matching the frontal to your client
Clients who suit a 13x4
- First-time frontal wearers who want a natural, low-maintenance look
- Clients who keep a consistent centre or slight side part
- Anyone who prefers a fringe, curtain bangs or a style that covers the parting
- Wearers on a tighter budget who still want full hairline coverage
- Salons that install frontals occasionally rather than weekly
For this group, four inches is not a compromise. It is the right amount of lace for the style, and it keeps the piece lighter and less bulky at the crown.
Clients who suit a 13x6
- Clients who change their parting between appointments
- Anyone who wears high ponytails, buns, half-up styles or bridal updos
- Wearers with a wider forehead or a receding hairline at the temples
- Clients with finer natural hair who need more blending room at the crown
- Stylists who build volume at the top rather than laying the hair flat
The deeper frontal is also the safer choice for a client you have not met before, because it can always be trimmed down. You cannot add lace that is not there.
Matching the frontal to your install style
Sew-ins and quick weaves
When a frontal is being sewn or glued down and then covered with a leave-out or a closure, the depth matters less. Four inches is usually sufficient because the parting is not the focus of the style. If your salon specialises in sew-in installations with a frontal for hairline coverage only, a 13x4 keeps the cost and the bulk down without any visible compromise.
Glueless and adhesive installs
Frontal-focused installs, where the lace is the centrepiece, benefit from the extra depth. A 13x6 gives the stylist more room to place the adhesive, more lace to melt down at the hairline, and more flexibility if the client's hairline sits slightly asymmetrically. It also holds up better over a multi-week wear period, because the parting can be moved slightly between refreshes without exposing the edge. Remember that the attachment cycle is separate from the hair itself: tape and sew-in attachments are typically redone every six to eight weeks, while the hair, cared for properly, lasts years.
Bridal and editorial work
For bridal, photoshoots and event styling, the 13x6 is usually the default. Updos, swept-back styles and deep side partings all need lace that reaches past the crown. Keeping two or three deep frontals in stock for these bookings avoids the last-minute scramble that pushes stylists into a rushed, compromised install.
Sourcing checklist for buyers
Whether you order four inches or six, the quality of the lace and the direction of the hair matter more than the measurement. Use this checklist when evaluating a supplier or a sample:
- Confirm the hair is Remy with cuticles aligned in one direction, so the frontal does not mat at the parting
- Check that the lace is soft enough to melt but strong enough to survive a trim without runs
- Ask how many donors are in the bundle, and whether the texture is consistent across the piece
- Test the hairline: is the knotting fine enough to pluck and customise, or does it look pluggy?
- Confirm the density at the parting, since a deep frontal with thin density will expose the lace
- Request a sample before committing to a full stock order, and install it on a block or a mannequin first
- Check the return and replacement policy in writing before the shipment leaves
Suvita Hair Global manufactures and exports 100 per cent virgin Remy Indian human hair frontals, closures, bundles and wigs from Delhi, and supplies salons, boutiques and importers internationally. Raw, virgin and Remy are the same grade at Suvita and differ only in the number of donors per bundle, so the choice between them is about texture consistency rather than quality tier. There is no minimum order quantity, sample orders are welcome, and wholesale list pricing applies from 1.5 kg. Standard orders ship unbranded in plain packaging, and private labelling is available on request with a minimum of 50 pieces per private-label order.
Stocking both widths
Most established salons and resellers settle on a split rather than a single width. A workable starting ratio is roughly two 13x4 frontals for every one 13x6, then adjust after a quarter based on what your stylists actually use. If your bookings skew towards bridal, editorial or updos, reverse that ratio. If you are a reseller supplying other salons, carry both and let your customers decide, because the right answer depends on their client list, not yours.
Length and texture also affect the decision. A long, straight 13x4 behaves differently from a short, curly 13x6, because curl pattern eats into the apparent depth. With tighter textures, the extra two inches of a 13x6 are often absorbed by the curl, so the visible parting space ends up closer to what a 13x4 gives on straight hair. Buyers working mainly in curly textures should lean towards the deeper frontal to compensate.
Finally, consider how the piece will be maintained. Frontals that are removed, washed and reinstalled repeatedly need lace that survives handling. A well-made frontal in any grade, cared for properly, will last a minimum of three to five years, so the cost per wear is low regardless of which width you choose. The real cost of a poor choice is stylist time and client dissatisfaction, not the unit price.
What to do next: decide which two or three install styles dominate your bookings, match those styles to a width, and order a small sample of each before committing to a stock position. Install both on a block, compare the parting depth against your most common client head shape, and let your stylists handle each one before you place a wholesale order. If you are unsure which grade and donor count suits your market, ask the manufacturer directly and request a sample in the texture you sell most.
Ready to source premium human hair — factory-direct?
Suvita Hair supplies wholesale extensions, wigs and bundles to salons, distributors and beauty brands, with active buyers in 23 countries. Reply within 24 hours, DHL door-delivery, no middlemen.
- Factory-direct wholesale rates
- Sample orders accepted
- No MOQ — sample orders welcome
- IEC & GSTIN registered exporter
Suvita Hair Editorial with Deepak Kumar
Seven+ years sourcing, grading, and exporting Indian human hair to wholesale buyers on every continent. We write to help salons and distributors buy smarter — no fluff, just what we actually see in the factory.
Related Articles

How to choose between 4x4, 5x5 and 6x6 lace closures for a natural parting
Choosing the right lace closure for a natural parting is one of the most important decisions a hair stylist or salon owner makes — because the wrong size can create a visible seam…
Read article
Payment Terms for Bulk Hair Orders: Protecting Salon Cash Flow
An honest look at advance payment in the hair trade, and the five protections a salon can set around it to keep its cash flow safe.
Read article
How to Read a Hair Extension Invoice: Key Terms B2B Buyers Must Know
Understanding the intricacies of a hair extension invoice is crucial for salon owners, boutique retailers, and wholesale distributors operating in the competitive beauty market. A…
Read article



